南祁连盆地木里冻土区天然气水合物烃源岩特征及评价     

张家政  祝有海  黄霞  王明君  赵广珍  王平康  张帅  庞守吉 《地质通报》2017,36(4):634-643

中国地质调查局2008年在南祁连盆地木里冻土区采集到了中国陆域第一例天然气水合物实物样品,对于天然气水合物的气体来源存在不同的认识。利用新完钻3口井样品的化验分析结果,分析了中侏罗统和上三叠统烃源岩有机地球化学特征。结果表明,中侏罗统江仓组、木里组煤系地层烃源岩有机质丰度较高,TOC(总有机碳含量)大于1%的样品占78.9%;氯仿沥青"A"含量大于0.1%的占总数的72.2%;有机质类型以Ⅱ_2、Ⅱ_1型为主;镜质体反射率R_o多介于0.7%~1.2%之间;71个样品生烃潜量平均值为8.8mg/g,总体处于生烃高峰期的生油阶段或凝析油阶段,属于好、很好烃源岩,为天然气水合物主力生烃层系。上三叠统尕勒得寺组亦为煤系地层烃源岩,TOC含量大于1%的样品占76.9%;氯仿沥青"A"含量小于0.05%;有机质类型以Ⅲ、Ⅱ_1型为主;镜质体反射率Ro介于1.1%~1.77%之间;总体处于生湿气或干气阶段,但由于构造抬升影响其生烃潜量,平均值仅为0.35mg/g,当前整体生烃能力较差,为非烃源岩或较差烃源岩,对天然气水合物成藏贡献不大。  相似文献   

The mechanism and verification analysis of permafrost-associated gas hydrate formation in the Qilian Mountain,Northwest China     

《Marine and Petroleum Geology》2017

Muri Basin in the Qilian Mountain is the only permafrost area in China where gas hydrate samples have been obtained through scientific drilling. Fracture-filling hydrate is the main type of gas hydrate found in the Qilian Mountain permafrost. Most of gas hydrate samples had been found in a thin-layer-like, flake and block group in a fracture of Jurassic mudstone and oil shale, although some pore-filling hydrate was found in porous sandstone. The mechanism for gas hydrate formation in the Qilian Mountain permafrost is as follows: gas generation from source rock was controlled by tectonic subsidence and uplift--gas migration and accumulation was controlled by fault and tight formation--gas hydrate formation and accumulation was controlled by permafrost. Some control factors for gas hydrate formation in the Qilian Mountain permafrost were analyzed and validated through numerical analysis and laboratory experiments. CSMGem was used to estimate the gas hydrate stability zone in the Qilian permafrost at a depth of 100–400 m. This method was used to analyze the gas composition of gas hydrate to determine the gas composition before gas hydrate formation. When the overlying formation of gas accumulation zone had a permeability of 0.05 × 10⁻¹⁵ m² and water saturation of more than 0.8, gas from deep source rocks was sealed up to form the gas accumulation zone. Fracture-filling hydrate was formed in the overlap area of gas hydrate stability zone and gas accumulation zone. The experimental results showed that the lithology of reservoir played a key role in controlling the occurrence and distribution of gas hydrate in the Qilian Mountain permafrost.  相似文献   

Influence of natural fractures on gas accumulation in the Upper Triassic tight gas sandstones in the northwestern Sichuan Basin,China     

《Marine and Petroleum Geology》2017

The Upper Triassic Xujiahe Formation in the northwestern Sichuan Basin, China, is a typical tight gas sandstone reservoir that contains natural fractures and has an average porosity of 1.10% and air permeability less than 0.1 md because of compaction and cementation. According to outcrops, cores and image logs, three types of natural fractures, namely, tectonic, diagenetic and overpressure-related fractures, have developed in the tight gas sandstones. The tectonic fractures include small faults, intraformational shear fractures and horizontal shear fractures, whereas the diagenetic fractures mainly include bed-parallel fractures. According to thin sections, the microfractures also include tectonic, diagenetic and overpressure-related microfractures. The diagenetic microfractures consist of transgranular, intragranular and grain-boundary fractures. Among these fractures, intraformational shear fractures, horizontal shear fractures and small faults are predominant and significant for fluid movement. Based on the Monte Carlo method, these intraformational shear fractures and horizontal shear fractures improve the reservoir porosity and permeability, thus serving as an important storage space and primary fluid-flow channels in the tight sandstones. The small faults may provide seepage channels in adjacent layers by cutting through layers. In addition, these intragranular and grain-boundary fractures increase the connectivity of the tight gas sandstones by linking tiny pores. The tectonic microfractures improve the seepage capability of the tight gas sandstones to some extent. Low-dip angle fractures are more abundant in the T₃X³ member than in the T₃X² and T₃X⁴ members. The fracture intensities of the sandstones in the T₃X³ member are greater than those in the T₃X² and T₃X⁴ members. The fracture intensities do not always decrease with increasing bed thickness for the tight sandstones. When the bed thickness of the tight sandstones is less than 1.0 m, the fracture intensities increase with increasing bed thickness in the T₃X³ member. Fluid inclusion evidence and burial history analysis indicate that the tectonic fractures developed over three periods. The first period was at the end of the Triassic to the Early Jurassic. The tectonic fractures developed during oil generation but before the matrix's porosity and permeability reduced, which suggests that these tectonic fractures could provide seepage channels for oil migration and accumulation. The second period was at the end of the Cretaceous after the matrix's porosity and permeability reduced but during peak gas generation, which indicates that gas mainly migrated and accumulated in the tectonic fractures. The third period was at the end of the Eogene to the Early Neogene. The tectonic fractures could provide seepage channels for secondary gas migration and accumulation from the Upper Triassic Xujiahe Formation into the overlying Jurassic Formation.  相似文献   

Pressure significance of gas chimneys     

《Marine and Petroleum Geology》2017

Analysis was carried out of part of the northern North Sea to test what the presence and style of gas chimneys indicate about fluid pressure (P_f) within hydrocarbon reservoirs. Previous results suggest that broad chimneys above a trap and thin chimneys on the flanks indicate the presence of hydrocarbons, whilst thin chimneys in the crest suggest the hydrocarbons have escaped. Each type of gas chimney is usually associated with overpressure within Mesozoic reservoirs, but the water leg is hydrostatically-pressured in most Cenozoic reservoirs. This indicates: (a) gas leaking from a trap does not necessarily cause P_f to become hydrostatic; (b) overpressure may not be necessary for the expulsion of gasses through seal units to create the chimneys; (c) although gas chimneys indicate the existence of an active hydrocarbon system, their presence does not appear to indicate anything significant about present-day P_f.  相似文献   

Reservoir origin and characterization of gas pools in intrusive rocks of the Yingcheng Formation,Songliao Basin,NE China     

《Marine and Petroleum Geology》2017

In 2013, the first discovery of gas pools in well LS 208 in intrusive rocks of the Songliao Basin (SB), NE China was made in the 2nd member of the Yingcheng Formation in the Yingtai rift depression, proving that intrusive rocks of the SB have the potential for gas exploration. However, the mechanisms behind the origin of reservoirs in intrusive rocks need to be identified for effective gas exploration. The gas pool in intrusive rocks can be characterized as a low-abundance, high-temperature, normal-pressure, methane-rich, and lithologic pool based on integrated coring, logging, seismic, and oil test methods. The intrusive rocks show primary and secondary porosities, such as shrinkage fractures (SF), spongy pores (SP), secondary sieve pores (SSP), and tectonic fractures (TF). The reservoir is of the fracture–pore type with low porosity and permeability. A capillary pressure curve for mercury intrusion indicates small pore-throat size, negative skewness, medium–high displacement pressure, and middle–low mercury saturation. The development of fractures was found to be related to the quenching effects of emplacement and tectonic inversion during the middle–late Campanian. SP and SSP formed during two phases. The first phase occurred during emplacement of the intrusive rock in the late Albian, when the intrusions underwent alteration by organic acids. The second phase occurred between the early Cenomanian and middle Campanian, when the intrusions underwent alteration by carbonic acid. The SF formed prior to oil charging, the SSP + SP formed during oil charging, and the TF formed during the middle–late Campanian and promoted the distribution of gas pools throughout the reservoir. The intrusive rocks in the SB and the adjacent basins were emplaced in the mudstone and coal units, and have great potential for gas exploration.  相似文献   

天然气水合物试采对接井卡钻事故分析与处理          下载免费PDF全文

李鑫淼  张永勤  李宽  刘秀美  尹浩  李小洋  王志刚 《探矿工程》2017,44(9):12-16

2016年,在青海木里盆地顺利完成了陆域天然气水合物试采工作,首次将对接井技术应用于天然气水合物试采,取得了显著的效果。钻井区域复杂地层给对接井钻井施工带来了极大的难度与风险,钻井过程中多次出现卡钻现象,本文主要介绍了天然气水合物试采对接井钻井过程中遇到的卡钻事故,并对主要卡钻原因进行了详细分析,给出了相应的解卡措施。  相似文献   

SAGD技术应用于陆域冻土天然气水合物开采中的理论研究          下载免费PDF全文

王志刚  张永勤  梁健  王汉宝  吴纪修  李宽  李鑫淼  尹浩  李小洋 《探矿工程》2017,44(5):14-18

天然气水合物被誉为最有研究价值和开采价值的清洁能源,已经成为当今世界能源研究的热点。但到目前为止还未形成成熟稳定的天然气水合物开采技术体系,仍处于研究和试采阶段。陆域冻土天然气水合物开采与海域天然气水合物开采相比相对比较容易,在钻进过程中能够形成较稳定的孔壁。天然气水合物开采的主要方法有热激法、降压法、置换法和化学抑制剂法。SAGD（Steam Assisted Gravity Drainage）技术也叫蒸汽辅助重力驱油技术,在重油、油砂开采中得到了迅速发展,取得了非常有效的成果,被认为是目前重油开采最有效的方法。对SAGD技术应用到陆域冻土天然气水合物开采中进行理论分析研究,经过分析发现将SAGD技术应用到天然气水合物开采中是可行的,但确定两口水平井之间的距离是关键,且在应用时要将上部井变为生产井,下部井变为注汽井。  相似文献   

海洋天然气水合物发育顶界的模拟计算          下载免费PDF全文

曹运诚  陈多福 《地球物理学报》2014,57(2):618-627

天然气水合物顶界的确定对于其资源评价十分重要,但目前还没有很好的方法来确定.本文利用在甲烷-硫酸根（SMI）界面硫酸根与甲烷所消耗的量相等和水-天然气水合物二相体系甲烷溶解度模型,建立了水合物顶界埋深计算的数学模型,并考虑硫酸根氧化有机质和微生物原位甲烷生成的影响.计算的ODP1245和IODP1327站位水合物顶界埋深分别为53 mbsf和83 mbsf,与钻探获得的水合物顶界埋深相吻合.  相似文献   

南海北部海底沉积物在温度变化下的三种声速类型          下载免费PDF全文

邹大鹏  卢博  阎贫  吴百海 《地球物理学报》2012,55(3):1017-1024

研究南海北部海底沉积物温度变化状态下声速性质,得出以下结论:(1) 南海北部海底沉积物具有声速温度正增长(STPIK)、声速温度负增长(STNIK)和声速温度波动(STWK)三种类型,后两种类型在世界其他范围内海域未见报道.(2) 声速温度正增长类型和声速温度负增长类型沉积物的温度变化对声速影响都具有十分显著的线性关系,但是原状样品由于组成不均匀性,增大了声速的非线性变化.(3)南海北部海底沉积物的孔隙度、密度等主要物理参数差异不明显,难以直接解释三类样品的温度-声速性质的不同.(4)对于STPIK类型沉积物,理论分析与实验结果的统一性,可以运用海底沉积物与海水声速比进行校正不同温度状态下的海底沉积物的声速.(5)对于STNIK和STWK类型沉积物,需要深入研究,从理论和实验角度揭开其机理和成因.海底沉积物声速-温度特性研究将为提高南海北部海域天然气水合物声学探测精度和准确度提供声速性质依据.  相似文献   

祁连山冻土区含天然气水合物层段的油气显示现象   总被引：3，自引：1，他引：2  

卢振权  祝有海  刘晖  张永勤  王平康  黄霞 《现代地质》2013,27(1):231-238

以祁连山冻土区天然气水合物钻孔DK-2孔为例,对含油气显示岩心样品进行了储集岩热解分析,结合野外观察到的含油气显示现象,讨论了油气显示性质及其对水合物的可能指示意义。野外观察到的油迹、油斑、油浸、油染等不同级别油气显示现象大多产出在细砂岩、中砂岩中,部分产出在粉砂质泥岩夹薄层碳酸盐岩接触面及裂隙中,它们均得到室内储集岩热解分析结果的证实。油气显示所指示原油性质以中质油、重质油为主,少部分为超重油,甚至为沥青。钻孔中油气显示现象与水合物密切伴生,特别是水合物产出深度段或下部常见具中质油特征的油气显示,或可作为水合物一种指示。  相似文献